ECP5¶

synth_ecp5 - synthesis for ECP5 FPGAs¶

yosys> help synth_ecp5¶

synth_ecp5 [options]¶

This command runs synthesis for ECP5 FPGAs.

-top <module>

use the specified module as top module

-blif <file>

write the design to the specified BLIF file. writing of an output file
is omitted if this parameter is not specified.

-edif <file>

write the design to the specified EDIF file. writing of an output file
is omitted if this parameter is not specified.

-json <file>

write the design to the specified JSON file. writing of an output file
is omitted if this parameter is not specified.

-run <from_label>:<to_label>

only run the commands between the labels (see below). an empty
from label is synonymous to 'begin', and empty to label is
synonymous to the end of the command list.

-noflatten

do not flatten design before synthesis

-dff

run 'abc'/'abc9' with -dff option

-retime

run 'abc' with '-dff -D 1' options

-noccu2

do not use CCU2 cells in output netlist

-nodffe

do not use flipflops with CE in output netlist

-nobram

do not use block RAM cells in output netlist

-nolutram

do not use LUT RAM cells in output netlist

-nowidelut

do not use PFU muxes to implement LUTs larger than LUT4s

-asyncprld

use async PRLD mode to implement ALDFF (EXPERIMENTAL)

-abc2

run two passes of 'abc' for slightly improved logic density

-noabc9

disable use of new ABC9 flow

-vpr

generate an output netlist (and BLIF file) suitable for VPR
(this feature is experimental and incomplete)

-iopad

insert IO buffers

-nodsp

do not map multipliers to MULT18X18D

-no-rw-check

marks all recognized read ports as "return don't-care value on
read/write collision" (same result as setting the no_rw_check
attribute on all memories).

The following commands are executed by this synthesis command:

begin:
    read_verilog -lib -specify +/ecp5/cells_sim.v +/ecp5/cells_bb.v
    hierarchy -check -top <top>

coarse:
    proc
    flatten
    tribuf -logic
    deminout
    opt_expr
    opt_clean
    check
    opt -nodffe -nosdff
    fsm
    opt
    wreduce
    peepopt
    opt_clean
    share
    techmap -map +/cmp2lut.v -D LUT_WIDTH=4
    opt_expr
    opt_clean
    techmap -map +/mul2dsp.v -map +/ecp5/dsp_map.v -D DSP_A_MAXWIDTH=18 -D DSP_B_MAXWIDTH=18  -D DSP_A_MINWIDTH=2 -D DSP_B_MINWIDTH=2  -D DSP_NAME=$__MUL18X18    (unless -nodsp)
    chtype -set $mul t:$__soft_mul    (unless -nodsp)
    alumacc
    opt
    memory -nomap [-no-rw-check]
    opt_clean

map_ram:
    memory_libmap -lib +/ecp5/lutrams.txt -lib +/ecp5/brams.txt [-no-auto-block] [-no-auto-distributed]    (-no-auto-block if -nobram, -no-auto-distributed if -nolutram)
    techmap -map +/ecp5/lutrams_map.v -map +/ecp5/brams_map.v

map_ffram:
    opt -fast -mux_undef -undriven -fine
    memory_map
    opt -undriven -fine

map_gates:
    techmap -map +/techmap.v -map +/ecp5/arith_map.v
    iopadmap -bits -outpad OB I:O -inpad IB O:I -toutpad OBZ ~T:I:O -tinoutpad BB ~T:O:I:B A:top    (only if '-iopad')
    attrmvcp -attr src -attr LOC t:OB %x:+[O] t:OBZ %x:+[O] t:BB %x:+[B]
    attrmvcp -attr src -attr LOC -driven t:IB %x:+[I]
    opt -fast
    abc -dff -D 1    (only if -retime)

map_ffs:
    opt_clean
    dfflegalize -cell $_DFF_?_ 01 -cell $_DFF_?P?_ r -cell $_SDFF_?P?_ r [-cell $_DFFE_??_ 01 -cell $_DFFE_?P??_ r -cell $_SDFFE_?P??_ r] [-cell $_ALDFF_?P_ x -cell $_ALDFFE_?P?_ x] [-cell $_DLATCH_?_ x]    ($_ALDFF_*_ only if -asyncprld, $_DLATCH_* only if not -asyncprld, $_*DFFE_* only if not -nodffe)
    zinit -all w:* t:$_DFF_?_ t:$_DFFE_??_ t:$_SDFF*    (only if -abc9 and -dff)
    techmap -D NO_LUT -map +/ecp5/cells_map.v
    opt_expr -undriven -mux_undef
    simplemap
    lattice_gsr
    attrmvcp -copy -attr syn_useioff
    opt_clean

map_luts:
    abc          (only if -abc2)
    techmap -map +/ecp5/latches_map.v    (skip if -asyncprld)
    abc9 -W 300
    clean

map_cells:
    techmap -map +/ecp5/cells_map.v    (skip if -vpr)
    opt_lut_ins -tech lattice
    clean

check:
    autoname
    hierarchy -check
    stat
    check -noinit
    blackbox =A:whitebox

blif:
    opt_clean -purge                                     (vpr mode)
    write_blif -attr -cname -conn -param <file-name>     (vpr mode)
    write_blif -gates -attr -param <file-name>           (non-vpr mode)

edif:
    write_edif <file-name>

json:
    write_json <file-name>

Note

Help text automatically generated from techlibs/ecp5/synth_ecp5.cc:31